add led support and muted

content.txt

@@ -0,0 +1,38 @@
+El kit Incluye:
+1 x Placa de Desarrollo Uno R3 con Chip CH340
+1 x Cable USB
+65 x Jumpers Protoboard
+1 x Protoboard de 830 puntos
+15 x LEDs (Rojo, Verde, Amarillo)
+30 x Resistencias (220, 10K, 1K)
+10 x Dupont Macho-Hembra
+1 x Potenciometro 10K
+1 x Buzzer Activo
+1 x Buzzer Pasivo
+1 x 74HC595N (Shift register, chip suelto)
+1 x Receptor Infrarrojo
+1 x LM35DZ (temperatura)
+1 x Sensor Llama (rojo con mic)
+5 x Switches boton c/Tope
+1 x Control Remoto Infrarrojo
+1 x Display 1 digito
+1 x Display 4 digitos
+1 x Display Matrix 8x8
+1 x Motor paso a paso de 5V
+1 x Display LCD 1602
+1 x Joystick PS2
+1 x Sensor Digital de Temperatura y Humedad DHT11 (carcaza azul)
+1 x Sensor de nivel de Agua (rojo largo)
+1 x Modulo RFID
+1 x Llavero RFID
+1 x Tarjeta RFID
+1 x Modulo sensor de Sonidos
+1 x Modulo Relay de 1 canal
+1 x Teclado matriz de 16 botones
+1 x Modulo RGB de 3 colores
+1 x Conector para batería de 9V
+1 x Servo Motor SG90
+1 x Modulo RTC
+1 x Modulo Driver UNL2003 (plaquita con chip y leds)
+1 x Sensor de inclinación (parece capacitor)
+3 x Foto Resistencias

door-sensor/door-sensor.ino

@@ -19,7 +19,8 @@ const int DOOR_SENSOR_PIN = 13;
 int currentDoorState; // current state of door sensor
 int lastDoorState;    // previous state of door sensor
 bool isArmed = true;
-bool muted = true;
+bool muted = false;
+bool ledOn = true;
 
 void setup()
 {
@@ -46,9 +47,19 @@ unsigned long lastTime;
 
 void showAlarm(bool fired)
 {
+  if(!ledOn)
+  {
+    offLed();
+    return;
+  }
   if(fired)
+  {
+    if(isArmed)
     {
       showRed();
+    }else{
+      showYellow();
+    }
     return;
   }
   if(isArmed)
@@ -83,6 +94,11 @@ void handleIR(){
           Serial.println("Alarm is " + String(isArmed ? "Armed" : "Disarmed"));
           // playTone();
           break;
+        case 70:
+          Serial.println("Led on/off");
+          ledOn=!ledOn;
+          showAlarm(false);
+          break;
         default:
           Serial.print("unk: ");
           Serial.println(IrReceiver.decodedIRData.command);
@@ -107,6 +123,8 @@ void handleDoor(){
     if(!isArmed)
     {
       Serial.println("Alarm is dissarmed, not fireing");
+      delay(500);
+      showAlarm(true);
       return;
     }
     Serial.println("Alarm is armed, firing");
@@ -116,6 +134,7 @@ void handleDoor(){
   }
   else
   if (lastDoorState == HIGH && currentDoorState == LOW) { // state change: HIGH -> LOW
+    delay(500);
     Serial.println("The door-closing event is detected");
     isArmed=true;
     showAlarm(false);

door-sensor/ledindicator.h

@@ -4,30 +4,34 @@ int ledAzul = 6;
 
 setupLeds(){
   pinMode(ledRojo,OUTPUT);
-pinMode(ledVerde,OUTPUT);
-pinMode(ledAzul,OUTPUT);
+  pinMode(ledVerde,OUTPUT);
+  pinMode(ledAzul,OUTPUT);
+}
+void offLed(){
+  digitalWrite(ledRojo,0);
+  digitalWrite(ledVerde,0);
+  digitalWrite(ledAzul,0);
 }
-
 void showRed(){
   digitalWrite(ledRojo,255);
-digitalWrite(ledVerde,0);
-digitalWrite(ledAzul,0);
+  digitalWrite(ledVerde,0);
+  digitalWrite(ledAzul,0);
 }
 
 void showGreen(){
   digitalWrite(ledRojo,0);
-digitalWrite(ledVerde,255);
-digitalWrite(ledAzul,0);
+  digitalWrite(ledVerde,255);
+  digitalWrite(ledAzul,0);
 }
 
 void showYellow(){
   digitalWrite(ledRojo,255);
-digitalWrite(ledVerde,255);
-digitalWrite(ledAzul,0);
+  digitalWrite(ledVerde,255);
+  digitalWrite(ledAzul,0);
 }
 
 void showBlue(){
   digitalWrite(ledRojo,0);
-digitalWrite(ledVerde,0);
-digitalWrite(ledAzul,255);
+  digitalWrite(ledVerde,0);
+  digitalWrite(ledAzul,255);
 }